Next up on our assembly guide - IFAM Baby Play Yards!
We have received many questions such as installation guide, is it hard to assemble, suitable for what mats etc. for our Play Yards and Toy Organizers. These are very good questions which helps the savvy parents make the best decision.
Therefore, we are coming up with a series of IFAM assembly guides to cover IFAM Play Yards and Toy Organizers.
First up on our list...
IFAM range of Play Yards are extremely easy to fix and this step by step guide will show you why is that so!
Step 1: Unboxing and laying them out
IFAM Birch Baby Play Yard comes with 12pcs play yard panels with 3 different sizes, connectors and non-slip levelers. You can also get extra play yard panels and add on activity panel to make the play yard bigger.
*3 steps installation guide is included in the booklet too!
Step 2: Keep the play yard setup sturdy with Non-Slip Leveler
With everything laid out, the next step is to fix the non-slip leveler to each panel.
Step 3: Connect the panels
Once the non-slip leveler has been fixed, simply hook up each panel and connect the panels with connectors. Adjust the non-slip leveler to the perfect height to complete the play yard setup!
If you are using MyLO LUXE Baby Foldable Play Mat or any 200x140cm play mat, do note that the door panel can only be fixed at the width side only!
You are done! JOB COMPLETED!
For Baby First Play Yard Assembly, the process are quite similar too!
Step 1: Unboxing
IFAM Baby First Play Yard comes with 10pcs play yard panels and non-slip pads. You can also get full set safety holders to keep your play yard in shape or add extra play yard panels to expand the play yard.
Step 2: Attach non-slip circular support to play yard panels
Each panel comes with 2 non-slip circular pads to increase frictional force and make your play yard setup sturdier!
Step 3: Hook them up!
Simply connect the panels by hook up each panel. You can hear a clear "dok" sound if you attached it correctly.
If you are using MyLO LUXE Baby Foldable Play Mat or any 200x140cm play mat, do note that the 65cm panel (the panel with 3 holes) can only be fixed at the length side only!
Hoorayy! The setup is now complete!
*p.s. above pictures provided by our AWESOME customers!
Alright, we are done with the installation guide for IFAM play yards. If you are looking for customized play yard dimension or have any other questions, leave a comment below or email us at ask.ade@adertek.com. We will get back to you as soon as we can!
Stay tune for our 2nd part, Toy Organizers assembly guide!
Cheers!
Click here to shop all IFAM Baby Play Yards!
]]>IMPORTANT: Do not place baby play yard on top of play mat / mattress that are more than 20mm thick for safety.
If your mat is thicker than 20mm or bigger than the above dimensions, you can add IFAM extension panels so as to fit the mat inside the yard.
The most common question for all parents when buying a play yard would be "Will my baby play mat or baby bed fit inside the play yard?"
Getting the right play yard & play mat can be a challenge given that different brands will have their own specific play yard and play mat sizes. Therefore, to help you make an informed decision, we have come out with a sizing chart to help you buy the right play yard for the right play mats.
If you do not have a play yard & play mat, the best recommendation would be IFAM Premium play yard bundles below.
]]>Step 1 - Un-boxing
Step 2 Fitting the anti slip pads
Step 3 Align the steps and slides
This step is slightly tricky. You need to match each pin to their corresponding holes on the panels using the shape - rectangle, square or circle. If you have fixed IFAM toy organizers before, then this would be easy.
Step 4 Tighten each side with screw caps and cover
Important step - remember to cover each screw cap to prevent your little ones from mingling with it.
You are done!
Our toy organizers are a big hit because of their amazing pastel colours and baby safety features. On top of that, they are also certified by KTC, Korea for the baby safety materials used.
Being one of our most popular product, this assembly guide will help our savvy mama and papa understand how easy it is to fix our toy organizers. So read on if you are one...
Just like the play yards, our toy organizers are extremely easy to fix! No bolts & nuts, screwdrivers or hammers required. A coin is all you need to tighten things.
This is also a good time to get your little ones to join in and start learning how to fix stuff themselves too!
1. Here is the box of Pororo 4 Shelves Toy Organizers (medium size toy organizer)
note: a single toy organizer weighs ~8kg. Our best seller, Design Toy Organizer - Extended, Premium or Special configuration weigh at least 10kg or more per box.
2. Unboxing!
3. Lay Them Out - lovely pastel colours and nothing complicated
4. Fix it up
With everything laid out, the next step is to assemble them! Is your child ready too?
5. All Done in less than 10mins!
For our Design Toy Organizer series, there are several configurations to cater for more toys and books. When the toy organizer gets bigger, the complexity will increase slightly – but nothing too difficult.
The panels in the middle (panel 2 & 3) has 2 types of holes, square and circle. This is to cater for the different bars and shelving on each side of the panel. Ensure square and circle head goes into their respective panel holes and you will be done in 10mins!
That's it for our Toy Organizer guide! If you have any questions, leave a comment below or email us at cs@adertek.com. We will get back to you as soon as we can!
Stay tune for our 3rd part which will explain more about our play yard accessories - to spice things up inside and around the play yard!